BIOS update
On this page
This guide shows how to update your BIOS safely, for compatibility, performance and security. Update the BIOS before you enable XMP/DOCP or Resizable BAR, because an update can reset those settings.
Important warning
Incorrect BIOS updates can permanently damage your motherboard. Only update if necessary, follow manufacturer instructions exactly, and never interrupt the update process.
Before you begin
Check current BIOS version
- Press
Win + R - Type
msinfo32and pressEnter - Look for BIOS Version/Date in the System Information window
Identify your motherboard
You need to know your exact motherboard model:
- Check System Information (as above) - Look for BaseBoard Manufacturer and BaseBoard Product
- Check physical motherboard: Model number is usually printed on the board
- Use system detection tools: Many manufacturer websites have auto-detection tools
Update process
Step 1: Download BIOS update
- Visit your motherboard manufacturer’s support website:
- ASUS: asus.com/support
- MSI: msi.com/support
- Gigabyte: gigabyte.com/support
- ASRock: asrock.com/support
- Enter your motherboard model
- Go to Downloads or BIOS section
- Download the latest BIOS file (usually a
.zipor.exefile)
Info
Read the BIOS update notes. Update only if the new version fixes issues you have or adds features you need.
Step 2: Prepare for update
- Back up the current BIOS: some manufacturers provide backup tools
- Keep the power stable: use a UPS if possible, or make sure your laptop is fully charged and plugged in
- Close your apps: close programs you don’t need
- Check your antivirus: if the manufacturer’s instructions say so, turn it off temporarily, and turn it back on afterwards
Step 3: Update BIOS
Method 1: Windows-based update (easiest)
Many manufacturers provide Windows utilities:
- Extract the downloaded BIOS file
- Run the BIOS update utility, such as
Setup.exeor the manufacturer’s own tool - Follow on-screen instructions
- Don’t power off or restart during the update
- System will restart automatically when complete
Method 2: BIOS flash utility
- Extract the BIOS file to a USB drive (FAT32 formatted)
- Restart and enter BIOS/UEFI (usually
DelorF2during boot) - Use the BIOS flash utility (varies by manufacturer)
- Select the BIOS file from USB
- Start the update process
- Do not power off or restart during the update
Critical warning
NEVER interrupt a BIOS update. The system will restart automatically when complete. Interrupting can brick your motherboard.
After update
- BIOS will restart automatically
- Enter BIOS/UEFI and verify the new version
- Load the optimised defaults, or set your settings again
- Save and exit
- Boot into Windows and verify everything works
Troubleshooting
Update failed
If the update process was interrupted:
- Try recovery methods: Many motherboards have BIOS recovery features
- Contact manufacturer support: They may provide recovery instructions
- Professional repair: May be required if recovery fails
System won’t boot after update
- Clear CMOS - Remove CMOS battery or use jumper (check manual)
- Reset BIOS settings: load the default or optimised settings
- Check all connections - Confirm RAM, CPU, and power cables are secure
Manufacturer resources
Find BIOS updates and documentation for ASUS motherboards
MSI motherboard BIOS updates and support
Gigabyte motherboard support and BIOS downloads
ASRock motherboard BIOS and driver downloads
Best practices
- Update only when necessary: Don’t update just because a new version exists
- Read release notes: Understand what the update fixes or adds
- Use stable power: Avoid power loss during the update
- Follow manufacturer instructions: Each manufacturer has specific procedures
- Keep a backup: some tools let you back up the current BIOS before updating
Next steps
After updating your BIOS:
- Enable XMP/DOCP: Unlock your RAM’s full speed
- Enable Resizable BAR: Improve GPU performance if you have a compatible graphics card
- Configure Atlas settings: customise your installation